— Обсуждение тут — !/bin/sh /etc/rc.commonSTART=99USE_PROCD=1APPBINARY=/opt/netdata/bin/netdataCONFIGFILE=/opt/netdata/etc/netdata/netdata.confstart_service() {mkdir -m 0755 -p /var/cache/netdatachown nobody /var/cache/netdatamkdir -m 0755 -p /var/lib/netdatachown nobody /var/lib/netdatamkdir -m 0755 -p /var/log/netdatachown nobody /var/log/netdataprocd_open_instanceprocd_set_param command $APPBINARY -D -c $CONFIGFILEprocd_set_param file $CONFIGFILEprocd_set_param respawnprocd_close_instance}
Месяц: Июнь 2025
PXE-boot openwrt
— Обсуждение тут — SSH into OpenWrt and create a new directory to download the PXE files into. This will be the ftpd root later as well. Then download the PXE files from https://netboot.xyz/downloads/: Add this to /etc/config/dhcp (replace the tftp_root, serveraddress and servername with yours): /etc/config/dhcp
Openwrt замена dnsmasq на dnsmasq-full
— Обсуждение тут — opkg update && cd /tmp/ && opkg download dnsmasq-full libgmp10 libnettle8 libnfnetlink0 kmod-nf-conntrack-netlink libnetfilter-conntrack3opkg remove dnsmasq && opkg install dnsmasq-full —cache /tmp/mv /etc/config/dhcp-opkg /etc/config/dhcp
Restore Mikrotik after Openwrt
— Обсуждение тут — Below is my solution:1) I installed the «rbcfg» package on routerboard rb912uag-2hpnd with openwrt installed.2) By terminal: root@OpenWrt:~#rbcfg set boot_protocol bootp root@OpenWrt:~#rbcfg set boot_device ethnand root@OpenWrt:~#rbcfg apply 3) Open Netinstall and reboot routerboard. Now netinstall sees routerboard and you can install RouterO